 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Features * Diplexer Single Mode Single Fiber 2x5 SFF SC Receptacle connector * Tx 1550nm/Rx 1310 nm * SONET OC-3 SDH STM-1 Compliant * Single +3.3V Power Supply * LVPECL Differential Inputs and Outputs * Wave Solderable and Aqueous Washable * Class 1 Laser Int. Safety Standard IEC-825 Compliant * Uncooled Laser diode with MQW structure * Complies with Telcordia (Bellcore) GR-468-CORE * EMI Shielding Finger Optional * RoHS compliance available Absolute Maximum Rating Parameter Power Supply Voltage Input Voltage Output Current Soldering Temperature Storage Temperature Symbol Vcc - Min. 0 0 -40 Max. 3.6 Vcc 30 260 85 Unit V V mA C C Note Iout - 10 seconds on leads only Tstg Recommended Operating Condition Parameter Power Supply Voltage Operating Temperature Data Rate Symbol Vcc Topr - Min. 3.1 0 - Typ. 3.3 155 Max. 3.5 70 - Unit V C Mbps Transmitter Specifications Parameter Optical Optical Transmit Power Output center Wavelength Output Spectrum Width Side Mode Supression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Symbol Po SMSR ER tr tf RIN TJ Min -5 1480 30 10 - Typical 1550 - Max 0 1580 1 2 2 -116 1.0 Unit dBm nm nm dB dB ns ns dB/Hz ns -20dB width Notes Output Power is coupled into a 9/125 m single mode fiber Compliant with ITU recommendation G.957/STM-1 10% to 90% Values 10% to 90% Values Measured with 223-1 PRBS with 72 ones and 72 zeros. LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 1 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Transmitter Specifications Parameter Electrical Supply Current Transmit Enable Voltage Transmit Disable Voltage Data Input Current-Low Data Input Current-High Differential Input Voltage Data Input Voltage-Low Data Input Voltage-High Symbol ICC VEN VDIS IIL IIH VIH-VIL VIL-VCC VIH-VCC Min 0 VCC-1.3 -350 300 -2.0 -1.1 Typical - Max 140 0.8 VCC Unit mA V V A A mV V V Notes Maximum current is specified at Vcc= Maximum @ maximum temperature - 350 -1.58 -0.74 These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs Receiver Specifications Parameter Optical Sensitivity Maximum Input Power Signal Detect-Asserted Signal Detect-Deasserted Signal Detect-Hysteresis Cross Talk Wavelength of Operation Symbol Pin Pa Pd - Min -3 -45 1 1260 Typical - Max -34 -34 4 -33 1360 Unit dBm dBm dBm dBm dB dB nm Notes Measured with 223-1 PRBS,BER= 10-10 Measured on transition: low to high (Note 1) Measured on transition: high to low (Note 1) Note 1: The SD level should be deasserted when fiber disconnected Receiver Specifications Parameter Electrical Supply Current Data Output Voltage-Low Data Output Voltage-High Signal Detect Output Voltage-Low Symbol ICC VOL -Vcc VOH- Vcc VSDL-Vcc Min -2.0 -1.1 -2.0 -1.1 Typical - Max 100 -1.58 -0.74 -1.58 -0.74 Unit mA V V V V Note The current excludes the output load current These outputs are compatible with 10K, 10KH and 100KECL and PECL outputs Signal Detect Output Voltage-High VSDH- Vcc LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 2 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Connection Diagram PIN 1 2 3 4 5 6 7 Warnings 8 9 10 Symbol RxGND RxVcc SD RDRD+ TxVcc TxGND TxDIS TD+ TD- Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal(LVPECL) Receiver Data Out Bar(LVPECL) Receiver Data Out (LVPECL) +3.3V dc power for the transmitter section Directly connect this pin to the tranmitter ground plane Transmitter disable(LVTTL) Transmitter Data In (LVPECL) Transmitter Data In Bar (LVPECL) LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 3 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Recommended Circuit Schematic PHY DEVICE TERMINATE AT TRANSCEIVER INPUTS Vcc(+3.3V) Z=50 TD- 100 LVPECL Z=50 TD+ 10 TD- 9 TD+ 8 TxDIS 7 TxGND 6 1H TxVcc 130 Vcc(+3.3V) C3 130 Tx Rx C2 10F RxGND RxVcc RD+ RD- SD 1H C1 RD+ Vcc(+3.3V) 1 2 3 4 5 Z=50 100 RD- LVPECL Z=50 130 130 Z=50 Vcc(+3.3V) 130 SD 82 NOTE:C1=C2=C3=100nF TERMINATE AT DEVICE INPUTS The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 4 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Recommended Circuit Board Layout DIMENSION IN MILLIMETER (INCHES) NOTES: 1.THIS FIGURE DESCRIBE THE RECOMMAND CIRCUIT BOARD LAYOUT FOR THE SFF TRANSCEIVER. 2.THE HATCHED AREAS ARE KEEP-OUT AREAS RESERVED FOR HOUSING STANDOFF. NO METAL TRACES OR GROUND CONNECTION IN KEEP-OUT AREAS. 3.THE MOUNTING STUDS SHOULD BE SOLDERED TO CHASSIS GROUND FOR MECHANICAL INTEGRITY. LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 5 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Package Diagram B-15/13-155-FDFB-SSC5 Units: mm Warnings Housing Lead PIN 1 PIN 5 Stand-off Legal Notice Housing Lead Stud Stand-off PIN 10 PIN 6 Stand-off LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 6 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Package Diagram B-15/13-155-FDFB-SSC5S Units: mm Matel Finger Stand-off PIN 1 PIN 5 Stand-off Housing Lead Stud PIN 10 PIN 6 Stand-off Housing Lead LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 7 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Ordering Information Available Options: B-15/13-155-FDFB-SSC5 B-15/13-155-FDFB-SSC5-G5 B-15/13-155-FDFB-SSC5S B-15/13-155-FDFB-SSC5S-G5 Part numbering Definition: B - 15/13 - 155 FDFB - S SC Tx Power Shielding Finger -RoHS * Wavelength 15/13: Tx Wavelength=1550nm Rx Wavelength=1310nm * Communication protocol (155 Mbps) * FDFB= SFF Transceiver, DFB * Single mode fiber * Connector options * Tx Output Power 5 = Tx power -5 to 0 dBm * Shielding Finger Option Blank = No Shieding Finger S = With Shieding Finger * RoHS Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 8 LUMNDS1282-Sep2806 Rev A.2 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver B-15/13-155-FDFB-SSC5 Warnings: Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notes: IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC's sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. (c) LuminentOIC, Inc. 2003 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213 9 LUMNDS1282-Sep2806 Rev A.2 |
Price & Availability of B-15-13-155-FDFB-SSC5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |